- Index
- Accessories
- 125cc Cup (3)
- 2 Air Caps (2)
- Air Hose (11)
- Air Hose Fitting (51)
- Air Regulator (65)
- Aluminum Cup (4)
- Brush (5)
- Carrying Case (10)
- Cleaning Kit (7)
- Hopper (71)
- Hopper, Spray Tip (10)
- Paint Spray Gun (4)
- Plastic Cup (3)
- Pressure Regulator (41)
- Repair Kit (5)
- Repair Tool (9)
- Reparing Tool (3)
- Spanner (5)
- Spray Tip (419)
- Valve (6)
- Other (4519)
- Air Inlet Size
- Brand
- Tip Size
- Type
- Air Spray Gun (813)
- Clear Coat (10)
- Complete (11)
- Cup Spray Gun (184)
- Do Not Apply (8)
- Full Size (15)
- Gravity (13)
- Gravity Feed (26)
- Hvlp (75)
- Hvlp Spray Gun (31)
- Hvlp Sprayer (73)
- Hvlp Sprayers (13)
- Manual Spray Gun (8)
- Mini (6)
- Mini (touch Up) (9)
- Paint Spray Gun (10)
- Spray Gun (241)
- Spray Guns (21)
- Spray Paint Gun (11)
- Spraygun (7)
- Other (3668)
- Warranty
Pro-Tek 4010GH-14 HVLP Gravity Feed Paint Spray Gun, 1.4 mm Nozzle, 600 mL
Pro-Tek 4010GH-14 HVLP Gravity Feed Paint Spray Gun, 1.4 mm Nozzle, 600 mL Aluminum Cup 8860. Pro-Tek 4010GH-14 is an HVLP gravity feed paint spray gun supplied with the 600 mL aluminum Cup 8860. The 1.4 mm setup is suited to base and clear coats, with low air consumption and shop-friendly working pressures. This is a universal finishing tool, not a replacement part. 1.4 mm nozzle for basecoats and clearcoats to balance flow and atomization.
Low air consumption rated near 9 CFM to run on common shop compressors. Working pressure 15 to 28 PSI for consistent film build and finish quality. Stainless steel nozzle, needle, and air cap for durability with common coatings. Universal HVLP gravity feed spray gun for automotive and industrial finishes; not a vehicle specific replacement part. 4010GH HVLP gravity spray gun.8860 aluminum gravity cup, 600 mL. Alternate Part Numbers / Cross References: 4010GH-1.4.
Nozzle Size: 1.4 mm. Air Consumption: approximately 9 CFM. Working Pressure: 15 to 28 PSI. Product Type: HVLP gravity feed spray gun. System Compatibility or Application: designed for applying automotive and industrial coatings with the 4010GH series; not a replacement part.
The 4010GH HVLP gravity feed paint spray gun can also be referred to as HVLP gravity spray gun, 1.4 mm spray gun, automotive paint gun, Pro-Tek 4010GH, and 600 mL aluminum cup spray gun. Pro-Tek supplies spray equipment and accessories for professional body shops and finishers, publishing working pressure, air consumption, and compatible cup specifications to support reliable, repeatable results.
Q: Which cup is included with 4010GH-14? A: The kit includes the 8860 aluminum gravity cup with 600 mL capacity. Q: What compressor output should I plan for? A: Plan for roughly 9 CFM at 15 to 28 PSI to maintain stable atomization with the 1.4 mm setup. Q: What coatings are the 1.4 mm setup best for?A: The 1.4 mm configuration is commonly used for basecoats and clearcoats; always match viscosity and reducer to finish requirements.