This gun is designed for use with the. HVLP turbine spray system, but it will work with any HVLP Turbine sprayer. It will not work with an air compressor.Professional grade - All metal construction, no rubber or plastic parts - entire gun can be immersed in solvent for cleaning! External packing nut, no need to remove nozzle to adjust needle packing! Spring loaded air cap moves in and out by simply turning retaining ring - adjust to spray any size pattern!
Material adjustment knob - enables you to control paint output, making small items as easy to spray as large items! Works with any HVLP turbine system! Provides the best atomization in the industry!
Projector sets available in the following sizes: 0.5mm, 1.0mm; 1.3mm; 1.5mm; 1.8mm; 2.0mm, 2.2mm. Bleeder gun with infinite adjustment of pattern size.Comes with 1.3mm projector set installed: recommended size for medium viscosity finishes such as: varnish, polyurethane, sealer, lacquer, stain, cellulose, automotive, acrylic, oil, creosote, wood primer. Includes 600ml aluminum gravity cup. Polyurethane, Glitter Paints, Cellulose, Acrylics, Synthetics, Lacquers, Fluorescents, Wood Stains, Creosote, Wood Primer, lacquers, urethanes, enamels, automotive paints, oil base. Oil Base, Oxides, Primers, Marine Paint, Varnish, Enamels, Multi-Color, Industrial Synthetics.
Emulsions, Oxides, Chlorinated Rubber, Zinc Rich Primers. Hammers, Latex, Oil Base Primers, Enamels, Marine, Masonry Paints, Texture Coatings, Heavy Primers, Water and Solvent Based Adhesives. Spray Pattern Shape : The Spray pattern is adjusted by turning the ears of the air cap into either a vertical, horizontal, or diagonal position as shown below.To change the spray pattern size, screw the air cap ring in or out accordingly. Turning the ring clockwise will make the pattern bigger (and reduce the atomization). Turning the ring counterclockwise will make the pattern smaller (and increase atomization). To increase the material flow, turn the adjusting knob on the back of the gun counterclockwise, to decrease the material flow, turn the adjusting knob clockwise. Reduces work normally done by brush. Clean up is fast and easy. Less draping and masking is needed. Cuts material waste from overspray. Transfer efficiency of 85% or better.
Save as much as 50% over conventional spray systems. Sprays all surfaces requiring a fine finish. Maximum control with minimal overspray or bounceback. Meets EPA Guidelines For Low VOC Emissions. Oil or water-based enamels and house paints.
The item "Sprayfine all metal HVLP turbine gravity spray gun withcup" is in sale since Sunday, January 29, 2017. This item is in the category "eBay Motors\Automotive Tools & Supplies\Air Tools\Spray Guns".
The seller is "turbineproducts" and is located in Jewett City, Connecticut. This item can be shipped worldwide.